วันอังคารที่ 23 ธันวาคม พ.ศ. 2551

Arctic Silver 5 Thermal Compound, 3.5 Grams

Arctic Silver 5 Thermal Compound, 3.5 Grams

Product Description


Arctic Silver 5 premium thermal compound, with 99.9% pure micronized silver, is specifically designed to maximize the thermal conductivity between todays high-powered processors and high-performance cooling assemblies. Arctic Silver 5 uses three unique shapes and sizes of near-pure silver particles to maximize particle-to-particle contact area and thermal transfer. It can reduce CPU core temperatures by up to 50F over standard silicone thermal pastes. Controlled triple phase viscosity allows Arctic Silver 5 to fill, over time, microscopic valleys and gaps in CPU and heatsink surfaces. One 3.5g tube can cover up to 25 CPU cores.
Rate Points :5.0
Brand :Artic Silver
Label :Artic Silver
Manufacturer :Artic Silver
MPN :148 0060
ProductGroup :CE
Studio :Artic Silver
Publisher :Artic Silver
Price :$10.36USD
Lowest Price :$2.25USD
Features
  • Thermal conductance: >350,000W/m2 degreesC (0.001 inch layer)
  • Easy to apply and remove
  • Will not separate, run, migrate, or bleed
  • Non-electrically conductive
  • 99.9% pure micronized silver

  • Customer ReviewsSA5 Good, ZM-STG1 Better.
    Rating Point :4 Helpful Point :0
    Hi all,

    Just bought this thinking that the Zalman CNPS9700 LED fan would need a good thermal paste. Much to my surprise the Zalman fan came with a high quality paste (ZM-STG1). In fact, Im giving this paste only 4 stars because its not as easy to apply as the Zalman paste, which comes in a bottle with a brush and used like white-out. Be sure to apply a think coating on both the CPU and intended heat-sink of whichever paste you use. SA5 paste requires a 200 hour curing period with multiple heat cycles, whereas the ZM-STG1 doesnt. The SA5 may be marginally better (1 degree C cooler), but that is questionable. ...
    great product
    Rating Point :5 Helpful Point :0
    there is just enough grease for one cpu (dont let the picture fool you it is really tiny) combine this with a new (better) cpu cooler and you are set... you will notice a cooler running cpu right away.
    7 degrees off!!!!
    Rating Point :5 Helpful Point :3
    p4 over here, always at 40 and 41 c, now 32-35 c, and on load only 39 c, never breaks to 40, you must buy!!!!.
    -5C on Core 2 Quad
    Rating Point :5 Helpful Point :0
    the Arctic silver compound did a great job on the 2 Pc ive got (Pentium 4 and Q6600) -5 on Q6600 and -10C on P4 compared to stock compound by intel
    Best thermal compound on the market
    Rating Point :5 Helpful Point :0
    Arctic Silver 5 is the best thermal compound on the market. There are other types that might be better for specific purposes (Arctic Cramique for example), but for cooling a CPU, this is the best. Ive used it extensively for quite a few computer builds as well as a few special projects like replacing the thermal compound on an Asus Formula X48 mother boards Northbridge and Southbridge heatsinks.

    The results are always a 4-10c drop in CPU temperatures under load. You will not notice a huge difference at idle. The real gains in heat dissipation come when the CPU is being pushed. Also, dont trust the board makers proprietary software to tell you what your temperatures are download a good program like RealTemp 2.41 or Everest for free (use google to find them). Either will give you more accurate numbers than Asus PC Probe, or whatever software your board manufacturer supplies.

    There are some saying Arctic Silver 5 didnt lower their temperatures. That is almost certainly because theyre using it incorrectly, which I can understand since the instructions provided are minimally useful. So for those of you who are not familiar with applying thermal paste, here is the process:

    1. Remove the old thermal compound. This is accomplished by using Isopropyl alcohol to dissolve and loosen the old thermal paste. I recommend purchasing an ArctiClean kit. For minimal cost it will give you the compound remover, as well as an excellent surface preparer. Apply a several drops of the cleaner to the top of the chip and let it soak for 20-30 seconds. You might have to reapply more drops of cleaner again depending on how much thermal compound was present on the chip to begin with. Wipe all the waste off with a lintless cloth or cotton swabs.

    2. Apply a surface cleaner. You can use more alcohol, or the surface preparer that comes in the arctic silver kit. Make sure there are no traces of the old compound: you can tell that the surface is perfectly clean when you can wipe it with a new q-tip and it comes away pure white.

    3. Apply Arctic Silver 5. DO NOT USE TOO MUCH! If you do, it will squish outside the edge of the chip, get on your motherboard, the CPU locking mechanism, your hands, etc... It makes a real mess. Start with a small amount and add more if necessary. The idea here is to get a THIN, EVEN LAYER across the entire chip surface. A toothpick actually works really well at spreading the paste around. You should not be able to see any part of the metal of the chip when youre done. Less is more in this instance many people think they need to slather this stuff onto the chip, but trust me that does nothing but make a mess.

    4. Install your heat sink and fan assembly. I recommend getting an aftermarket heat sink as those provided by Intel are notoriously poor. Zalman makes some great ones. Do NOT buy on that uses push pins to lock in place. You want one with screws and mounting bracket so that it is very securely attached to the motherboard and in turn, your CPU. This is probably equally important to applying the thermal compound correctly, because all the compound in the world wont help you if the heatsink isnt making solid contact with the chips surface.

    If you follow those steps, you will see a massive improvement in your core temps. Just remember that heat dissipation is achieved by the fans in your case and heatsinks, not the compound itelf. The compound simply allows for a much better transfer for heat from chip-->heatsink. I swear by Arctic Silver, and I promise you it works if you use it correctly.

    Similar Item
  • Intel Core 2 Quad Q6600 Quad-Core Processor, 2.40 GHz, 8M L2 Cache, LGA 775
  • The Intel Core 2 Quad processor is the latest in cutting edge processor technology for the desktop PC. Based on the Intel Core micro-architecture, the Intel Core 2 Quad processor delivers four complete execution cores within a single processor, deliv
  • ArctiClean kit 60ml Kit includes 30ml ArctiClean 1 and 30ml ArctiClean 2
  • ArctiClean is a two-step cleaning process that removes existing thermal grease or pads and prepares the thermal surface for a fresh application of thermal interface material. ArctiClean is a specially formulated product to remove TIM from heatsinks a
  • Amd Athlon64 Ee Single-Core 1640 (2.7Ghz) Socket Am2 L2=512Kb Retail Box
  • Belkin Anti-Static Wrist Band with Adjustable Grounding
  • BELKIN F8E093 - Now that youve gained the expertise and confidence to upgrade or even build your own computer, dont destroy your plans with an inadvertent jolt of static electricity. Be sure to use this inexpensive, comfortable Anti-Static grounding
  • Zalman CNPS9700LED Ultra Quiet Cpu Cooler
  • Despite the fact that computers have become commonplace at home and at workplaces for a long time, true user friendliness of the computers is still a long shot. Zalman strives to make that goal a closer reality through extensive research and developm

    ไม่มีความคิดเห็น:

    แสดงความคิดเห็น